Quick
Start
:
FLUKE Ti20
© 2011 The Snell Group / 322 N. Main St. / Suite 8 / Barre, VT / 05641 / 800.636.9820 / www.thesnellgroup.com
FLUKE Ti20 Page 2
DONE
ADJUST
RTC
Pressing LEVEL will allow you to adjust level higher or
lower (Fig 3).
Pressing SPAN to adjust span wider or narrower (Fig 4).
7.
PAUSE IMAGE:
Pause or freeze the image by momentarily pulling the green
Trigger
in front of the pistol grip.
The LCD will display the “Image Captured” message. (If this is not an image you desire to save, abort the save by
pulling the trigger again and return to a live image.)
8.
SAVE IMAGE:
To save an image, pause the image as above.
The new menu will now give you the options to SAVE [F1] or CANCEL [F2]. Simply push the [F1] button to save
the displayed image.
9.
PALETTE:
To change color palettes press the [F2] button until the menu above the [F3] button says PALETTE.
Push [F3], then [F1] or [F3] to scroll through the different color palette choices.
10.
EMISSIVITY:
Press the [F2] button until [
ε
] is displayed on the lower left side if the LCD (Fig 5).
Press the [F1] button. Emissivity will be displayed in red.
Press [F1] to increase emissivity or [F3] to lower
emissivity.
11.
BACKGROUND (RTC):
Press the [F2] button until [RTC] is displayed on the lower right side if the LCD.(fig5)
Press the [F3] button. RTC will be displayed in red.
Press [F1] to toggle RTC on/off. (Fig6)
Press [F3] to Adjust.
Press [F1] to increase RTC or [F3] to lower RTC.
Fig 5
MENU RTC
ε
Fig 6
DONE
Fig 3
Fig 4
DONE
DONE
IFOV =2.7 mRad (Theoretical with 128x96 Detector and standard lens) Detect 1in. target @ 30ft.
