ThermoView
®
TV40 Series
Users Manual, Rev. 1.1, Apr 2019
30
6.4 Web Server Application
The ThermoView camera is equipped with an onboard web-server. Several information is available and will be
displayed using a standard web browser. Furthermore, several settings can be initiated and transferred to the
imager. It is possible to display or set the device IP address, to modify the focus of the infrared camera or to upload
a new firmware. Of course, there are two screen domains for displaying the infrared camera image on the upper
screen domain and the visible light camera image on the lower screen domain.
6.4.1 Establishing Communication
For accessing the camera web interface, a standard web browser can be used. For that, you need to know current
IP address of the camera.
In case that
the camera’s IP address is unknown it can be obtained by following the steps below:
•
Start the ThermoView software and establish the connection to the camera. Note the current IP address
of the camera. The ThermoView software is available for download from the web site of the manufacturer.
•
Quit the ThermoView software and open the web browser.
•
Type the noted IP address in the address line of the browser.
•
A screen similar to the one below indicates a successful established communication.
Figure 6-2: Web Server Application
6.4.2 Camera Info
The <Camera Info> menu box displays several information regarding important camera data such as manufacturer,
serial number, firmware revision number, current temperature range, pixel resolution, frame rate, and internal case
temperature. The <Temperature Range> menu is the only user changeable parameter allowing to switch between
<temperature sub range>, <temperature full range>, and <auto>. In the <auto> mode, the camera automatically
switches to the best fitting range depending on the measured minimum and maximum temperatures.
6.4.3 Camera Access
The <Camera Access> menu box provides three clickable buttons which behave as following described.
<Upload Firmware>
– opens a dialog box which allows to browse for a new firmware file. Contact the TechSupport
team for getting latest firmware file available.
www.
.com
1.800.561.8187
