Fluke PG9000 Series, Руководство по эксплуатации и обслуживанию

Страница: 25 / 202

2. INSTALLATION
Page 15 © 2011 Fluke Calibration
Table 7. AMH-100 Mass Set Parts List
DESCRIPTION PART NO.
Mass Set Refer to Table 8
Reusable Molded Transit Case with Foam Inserts
40 kg set (MS-AMH-40)
60 kg set (MS-AMH-60)
80 kg set (MS-AMH-80)
100 kg set (MS-AMH-100)
3123990
1 ea.
1 ea.
1 ea.
1 ea.
3068984
1 ea.
2 ea.
2 ea.
3 ea.
Calibration Report 3152121
Table 8. Mass Set Compositions
DESIGNATION PART #
NOMINAL
TOTAL
MASS (kg)
MASS SET COMPOSITION
10
kg
5
kg
2
kg
1
kg
0.5
kg
0.2
kg
0.1
kg
MAKE-UP
MASS
(kg)
MS-7002-35 3069861 35 - 5 2 1 1 2 1 1 (4) -
MS-7002-40 3070021 40 - 6 2 1 1 2 1 1 (4) -
MS-7002-45 3069980 45 - 7 2 1 1 2 1 1 (4) -
MS-7002-55 3069877 55 - 9 2 1 1 2 1 1 (4) -
MS-7002-80 3070000 80 6 1 2 1 1 2 1 1 (9) -
MS-7002-100 3070017 100 8 1 2 1 1 2 1 1 (9) -
DESIGNATION PART # NOMINAL
TOTAL
MASS (kg)
MASS SET COMPOSITION
10
kg 6.4
kg
6.2
kg
3.2
kg
1.6
kg
0.8
kg
0.4
kg
0.2
kg
0.1
kg
BELL,
SHAFT,
BINARY
MASS
CARRIER
(3 PARTS)
MS-AMH-40 3071528 40 3 1 - 1 1 1 1 1 1 1
MS-AMH-60 3071519 60 5 1 - 1 1 1 1 1 1 1
MS-AMH-80 3071504 80 7 1 - 1 1 1 1 1 1 1
MS-AMH-100 3071440 100 9 1 - 1 1 1 1 1 1 1
All mass sets include a trim mass set of 50 g to 0.01 g (total 100 g)
Note
The mass loading bell and piston make up part of the total mass
load. The mass loading bell for loading manual mass sets is
ordered and shipped separately. The mass loading bell for AMH
mass sets is delivered with the mass set.
2.2 Site Requirements
The exact PG9000 system installation is affected by the elements other than the PG9000 Platform that
make up the PG9000 system.
When selecting and preparing a site to set up the PG9000 system, the following should be considered:
•
Ambient conditions: To achieve optimum metrological performance, ambient conditions should be
controlled and maintained within the following:
♦
Temperature: 19 to 26 °C, minimize rate of change of temperature.
♦
Relative Humidity: 5 to 95 %RH (non-condensing).
♦
Ambient Pressure: Minimize external influences that will cause barometric instability.