Fluke OptiView II Series, Руководство по началу работы, Страница: 48 / 60

OptiView
TM
Series II
Getting Started Guide
40
Setting the Remote Control PC Field
Set this field to specify an off-net PC running the OptiView Browser
TM
remote user
interface software. When this field is set, the analyzer will send its identification
back to the specified PC running the remote user interface software. Set this field
to <none> , <last connected> , or manually enter the IP address of the remote PC
that will be running the OptiView Browser
TM
remote user interface software. <last
connected> is the last remote session to terminate from the analyzer, and that PC’s
IP address is saved into this field.
Setting the OptiView Console
TM
Field
The OptiView Console field enhances the interoperability of the analyzer and
Fluke Networks' OptiView Console
TM
product. The address you enter should be the
IP address of the PC running the OptiView Console
TM
agent. The analyzer will
send packets to this address when it is connected to the network, and when the IP
address of the analyzer is changed.
These packets assist the OptiView Console
TM
product in keeping its information
current. OptiView Console
TM
maintains a special list of all Fluke Networks'
products that are connected to the network and can even be used to launch a user
interface session on any OptiView
TM
analyzer.
OptiView Console
TM
is purchased separately. A 30 day evaluation copy can be
downloaded from www.flukenetworks.com.
Setting Up the SNMP Community Strings
The MIB II Read community string , RMON2 Read community string, and
RMON2 Read/Write community string fields controls other clients from
accessing the MIB II and RMON agent information on the OptiView
TM
Pro and Pro
Gigabit analyzers.
The field labeled
Strings used to query other SNMP agents is used by the
analyzer to interrogate discovered SNMP agents within devices on the attached
network.
Note
Strings used to query other SNMP agents can have multiple entries,
each separated by a space. The order in which they are entered is the
order in which they are sent to the device.