Fluke MultiFiber Pro, Руководство пользователя

Страница: 13 / 68


Safety Information
3

Carefully read all instructions.

Do not open the case. You cannot repair or replace
parts in the case.

Do not modify the Product.

Use only replacement parts that are approved by
Fluke Networks.

Do not use the Product around explosive gas,
vapor, or in damp or wet environments.

Use this Product indoors only.

Use the Product only as specified, or the protection
supplied by the Product can be compromised.

Do not use and disable the Product if it is damaged.

Do not use the Product if it operates incorrectly.

Batteries contain hazardous chemicals that can
cause burns or explode. If exposure to chemicals
occurs, clean with water and get medical aid.

Remove the batteries if the Product is not used for
an extended period of time, or if stored in
temperatures above 50 °C. If the batteries are not
removed, battery leakage can damage the Product.

The battery door must be closed and locked before
you operate the Product.

Repair the Product before use if the battery leaks.

Replace the batteries when the low battery
indicator shows to prevent incorrect
measurements.

Be sure that the battery polarity is correct to
prevent battery leakage.

Do not disassemble or crush battery cells and
battery packs.

Do not put battery cells and battery packs near
heat or fire. Do not put in sunlight.

Have an approved technician repair the Product.
 Warning: Class 1 Laser 
To prevent possible eye damage caused by
hazardous radiation:

Do not look directly into optical connectors (see
Figure 2). Some optical equipment emits invisible
radiation that can cause permanent damage to
your eyes.

Do not turn on the source unless a fiber is attached
to the port.

When you inspect fiber endfaces, use only
magnification devices that have the correct filters.

Use of controls, adjustments, or procedures not
stated herein can possibly result in hazardous
radiation exposure.