Fluke FIBER OneShot, Руководство пользователя

Страница: 15 / 26

11
How to Clean Connectors and Adapters
How to Clean Bulkhead Connectors (sources and
patch panels)
1 Do steps 2 and 3 above to put solvent on a swab.
2 Push the swab into the connector, twist it around 3 to 5
times against the endface, then discard the swab.
3
Twist a dry swab around in the connector 3 to 5 times.
4
Before you make a connection, use a fiber microscope (for
example, the Fluke Networks FiberInspector
™ Video
Microscope) to do an inspection on the connector.
How to Clean Connector Ends
1
Touch the tip of an optical-grade solvent pen or swab
soaked in solvent to a dry, optical-grade wiper.
2 Rub the connector endface across the solvent on the wiper,
then rub it two times across the dry area of the wiper.
Note
A different procedure is necessary to clean some
connector styles (for example, VF-45).
Always put protective caps on connectors you do not use. At
intervals, clean the caps with a swab or wipers and fiber optic
solvent.