User’s Guide – version 3.5
NetFlow Tracker
50
invpn
– specifies a VPN that the input interface must be part of.
<name>
The VPN name; see
Device Settings
for more information
<id>
The VPN identifier
outvpn
– specifies a VPN that the output interface must be part of. Format as for
invpn
above.
vpn
– specifies a VPN that either interface must be part of. Format as for
invpn
above.
srcaddr
– specifies an acceptable source address.
<addr>
The address in dotted-decimal format
<addr1>-<addr2>
A range of addresses, with
<addr1>
being the start of the
range and
<addr2>
the end
srcaddr_exclude=true
– specifies that the supplied source addresses are excluded
rather than included.
dstaddr
– specifies an acceptable destination address. Format as for
srcaddr
above.
dstaddr_exclude=true
– specifies that the supplied destination addresses are
excluded rather than included.
addr
– specifies an acceptable source or destination address. Format as for
srcaddr
above.
addr_exclude=true
– specifies that the supplied source or destination addresses are
excluded rather than included.
proto
– specifies an acceptable IP protocol.
<name>
The protocol name, such as
TCP
or
UDP
<number>
The protocol number, in the range
0
-
255
proto_exclude=true
– specifies that the supplied protocols are excluded rather than
included.
srcport
– specifies an acceptable source application port number.
<port>
The application port number in the range
0
-
65535
<port1>-<port2>
A range of port numbers, with
port1
being the start of the
range and
port2
the end
srcport_exclude=true
– specifies that the supplied source application port numbers
are excluded rather than included.
