3210-PR-TF English Instruction Sheet
Page 4
Instructions
To use the BP290 with a 190 Series II ScopeMeter or 430-II Power
Quality Analyzer:
1.
Carefully check for proper positioning of the support plate before
you remove the protective layer from the self-adhesive side of the
support plate. See
A
in figure.
2.
Install the support plate on the battery pack
B
.
3.
Place the battery with the support plate into the groove of the battery
compartment. Press firmly to make sure the battery is placed
correctly
C
.
The BP291 does not need any modification before you install the battery
pack into the test tool.
The battery pack has an indicator with four LEDs (25 %, 50 %, 75 %, and
100 % charge) and a test button.
To check the battery charge:
1.
Push
T
. The LEDs light to show the battery charge level.
If all four LEDs are on, the battery charge is at 100 % of capacity.