manualshive.com logo in svg

Fluke 983, Руководство пользователя, Страница: 34 / 40

Поделиться
Скачать
Fluke 983 Скачать руководство пользователя страница 34

Fluke 983 
Users Manual 

 

24 

Troubleshooting 

Use Table 2 to troubleshoot possible problems with the Particle Counter. 

Table 2. Troubleshooting 

Problem 

Possible Reason and Recommended Actions 

Particle Counter does not zero count 

1.

 

Zero count filter or adapter is not properly attached.  Reattach the filter or 
Filter Adapter.  

2.

 

Internal air leak. Contact Fluke for repair. 

3.

 

Cell contamination by excessive dust exposure. Return the Particle Counter 
to Fluke. 

Particle Counter does not turn on 
when pressing the POWER key. 

Battery voltage is low. Refer to “Charging the Battery and Using the AC Adapter”. 

Try turning the unit on again after the ac adapter/charger is connected. If the 
Particle Counter does not turn on, contact Fluke for assistance. 

“

LOW BATTERY

” displays 

Battery voltage is low. Refer to “Charging the Battery and Using the AC Adapter”. 

Particle Counter battery does not 
charge 

A problem with the battery is indicated. Disconnect the Particle Counter from the ac 
adapter/charger. Check the line cord. If the problem persists, contact Fluke. 

After fully charging the battery in 

trickle charge mode, the display does 

not show a full battery charge.

 

The Particle Counter needs to be turned on and the charger connected for the 

charge circuitry to update the battery status symbol. After the Particle Counter is 

turned on with the charger plugged in, the battery status symbol updates in 

approximately 5 minutes.

 

Display is too dark or light 

The display contrast is set too low or too high. Turn the unit on, press 

 to darken 

the display or 

 to lighten it. 

Содержание 983









































Отзывы:

Нет отзывов