Fluke 9640A Series, Инструкция по эксплуатации

Страница: 83 / 324

Local Operation
Operating the Instrument
3
3-35
Rename
Rename the selected memory location to something more meaningful.
Delete
Delete the settings from the selected memory.
Save
Instrument
Saves the basic instrument settings, that is, those settings assigned to
the vertical soft keys on the initial Instrument Setup screen
(press

to view these keys).
Save Mode
Saves the present output settings for one of the output modes: Sine,
Modulated, or Swept. Savings do not include the basic instrument
settings.
Recall Settings
Immediately recalls and applies the settings associated with the
selected memory (slot).
The following Save/Recall procedures are all initiated from the Save/Recall screen. Press

to access the screen.
Making a Memory Selection
After calling the
Save/Recall
screen, the first step in using the Save/Recall function is to
select one of the 10 memory slots. By default, the first slot is selected (yellow high light)
when the Save/Recall screen appears. Use either the Spin Wheel or the
 
keys to
scroll through the slots and make a selection.
Renaming a Selection
By default, the 10 available memory slots are named
SLOT-1
through
SLOT-10
. Any one
or all of the slots may be renamed to something more meaningful. Use the following
procedure to rename a slot:
1.
From the
Save/Recall
screen, select the slot to be renamed.
2. Press the
Rename
soft key. A 10 character prompt appears at the bottom of the list.
3. Use the Keypad to enter a new name for the slot. The name may be any combination
of up to 10 alphanumeric characters.
4. When the new name is correct, press
ENTER
to transfer the new name to the slot.
Deleting a Selection
To delete the settings previously saved to a memory slot, select the slot and press the
Delete
soft key. The deleted settings revert to a default or Unused state (Unused is
displayed in the selected slot). Recalling settings from an unused slot has no effect on the
Instrument.
Saving an Instrument Setup
Settings that apply to the instrument setup include those setting that apply to the
instrument but not those that define the output signal. For example, all of the preferences
settings are instrument setup settings. Use the following procedure to save a set of
instrument setup settings to a memory slot:
1.
From the
Save/Recall
screen, select a slot for saving the instrument setup settings.
2. Press the
Save Instrument
soft key. If the memory slot contains previously saved
settings, the screen prompts for overwrite permission (
Yes
or
No
). Pressing the
Yes
soft key saves the new settings, and the Type column in the selected slot field
displays
Instrument (xx)
to identify the settings as instrument setup settings.
Pressing the No soft key aborts the save attempt.