Fluke 9100S, Руководство пользователя

Страница: 24 / 52

9100SDry-WellCalibrator
ConstantTemperatureBlockAssembly
16
the temperature of the block. The entire assembly is suspended in an air cooled
chamber thermally isolated from the chassis and electronics.
WARNING:
The opening in front of the block may be very hot due to air
blowing forward.
The constant temperature block is available in the following configurations.
Block “A” has six holes, four that accept probe diameters of 1/4”, 5/32”, 1/8”, and
1/16”, and two that accept probes of 3/16” diameter to allow comparison calibrations.
Block “B” has four holes that accept probe diameters of 3/8”, 1/4”, 3/16” and 1/8”.
Block “C” has two holes that accept probe diameters of 3/16” and 1/2”.
Block “D” has six holes, two that accept probe diameter of 3 mm, two that accept
probes of 4 mm diameter, and two that accept probes of 6 mm diameter.
Surrounding the well opening are small ventilation holes which provide cooling to the
instrument.
Figure 4
1/16" (1.6 mm)
3/16" (4.8 mm) 3/16" (4.8 mm)
1/8" (3.2 mm)
5/32" (4 mm)
1/4" (6.4 mm)
Block “A”
9100S Fixed-Block Options
3/16" (4.8 mm)
1/8" (3.2 mm)
1/4" (6.4 mm)
3/8" (9.5 mm)
Block “B”
3/16" (4.8 mm)
1/2" (12.7 mm)
Block “C”
6 mm
Block “D”
4 mm
6 mm
3 mm
3 mm
4 mm
Fixed block options
1.888.475.5235 info@Fluke-Direct.com
Fluke-Direct
.com