Fluke 902 FC, Руководство пользователя

Страница: 8 / 32

902 FC
Users Manual
4
• Do not exceed the Measurement Category (CAT)
rating of the lowest rated individual component of a
Product, probe, or accessory.
•
Comply with local and national safety codes. Use
personal protective equipment (approved rubber
gloves, face protection, and flame-resistant clothes)
to prevent shock and arc blast injury where
hazardous live conductors are exposed.
• Before each use, examine the Product. Look for
cracks or missing pieces of the clamp housing or
output cable insulation. Also look for loose or
weakened components. Carefully examine the
insulation around the jaws.
•
Do not use test leads if they are damaged. Examine
the test leads for damaged insulation and measure a
known voltage.
• Do not touch voltages >30 V ac rms, 42 V ac peak, or
60 V dc.
•
Do not measure current while the test leads are in the
input jacks.
• Do not apply more than the rated voltage, between the
terminals or between each terminal and earth ground.
•
Measure a known voltage first to make sure that the
Product operates correctly.