Fluke 77 Series IV, Руководство пользователя

Страница: 14 / 22

Model 77 Series IV
Users Manual
10
Measuring AC or DC Current
XW
Warning
To avoid personal injury or damage to the Meter:
•
Never attempt to make an in-circuit current measure-
ment when the open-circuit potential to earth ground
is
>
1000 V.
•
Check the Meter's fuses before testing. (See “Testing
the Fuses”.)
•
Use the proper terminals, switch position, and range
for your measurement.
•
Never place the probes in parallel with a circuit or
component when the leads are plugged into the
current terminals.
Turn power OFF, break circuit, insert Meter in series, turn power
on.
CAT
CAT
+
+
RANGE HOLD MIN MAX
mA
A
DC
AIK08F.EPS
Measuring Frequency
XW
Warning
To avoid electrical shock, disregard the bar graph for
frequencies >1 kHz. If the frequency of the measured
signal is >1 kHz, the bar graph is unspecified.
The Meter measures the frequency of a signal. The trigger level is
0 V ac for all ranges.
+
RANGE HOLD
MIN MAX
Hz
V
AC Voltage Frequency
EOM09F.EPS
•
To exit frequency, press yellow button or turn the rotary switch.
• In frequency, the bar graph shows the ac voltage accurately up
to 1 kHz.
• Select progressively lower ranges using manual ranging for a
stable reading
.