Calibration Bath
Controller Operation
35
Temperature Scale Units
The temperature scale units of the controller may be set by the user to degrees
Celsius (
°
C) or Fahrenheit (
°
F). These units are used in displaying the bath
temperature, set-point, vernier, proportional band, and cutout set-point.
The temperature scale units selection is accessed after the vernier adjustment
function by pressing “SET”. From the temperature display function access the
units selection by pressing “SET” 4 times.
Bath temperature
Access set-point memory
Set-point memory
Access set-point value
Set-point value
Access vernier
Vernier setting
Access scale units selection
Scale units currently selected
Press “UP” or “DOWN” to change the units.
New units selected
Press “SET” to accept the new selection and resume displaying the bath
temperature.
Set the new units and resume temperature display
Secondary Menu
Functions which are used less often are accessed within the secondary menu.
The secondary menu is accessed by pressing “SET” and “EXIT”
simultaneously and then releasing. The first function in the secondary menu is
the heater power display.
25.00 C
1. 25.0
C 25.00
0.00000
Un= C
Un= F
