Fluke 56 Series Скачать руководство пользователя

Страница: 16 / 34

56x

Users Manual

Table 2. Top-Level Menu Description

Level

Left

Softkey

Description

Center

Softkey

Right

Softkey

Description

Save

Save reading to memory

Menu Light

Adjust backlight
brightness

Mem

Review/delete memories

Menu



Set emissivity

MnMx

Enables Min/Max

Menu Avg

Enable Avg/Diff

Toggle between C and F

Menu Alarm

Set and enable alarms



(Lock)

Lock the thermometer on

Menu Laser

Toggle the laser on/off

Setup

- Turn off/on backlight
- Change Time/Date
- Change Language

Menu -

Each menu item and function is explained in greater detail in the following

sections.

Save

To save readings:
1. Pull the trigger to take a measurement.
2. Release the trigger to stop taking the measurement.
3. Press the

Save

softkey to enter the Save menu.

4. Press the

Yes

softkey to save the reading.

The reading is assigned a memory location and a time and date stamp.
The reading includes:

•

temperature

•

Thermocouple temperature (if connected)

•

Emissivity

•

Min/Max/Avg/Dif (if either Min/Max or Avg/Dif is enabled)

•

Date/Time

You may also press the

Cancel

softkey to abort saving the reading.

Light

The thermometers are equipped with a backlit display with two brightness levels.

The

Light

softkey is used to adjust the backlight brightness. The backlight is on

each time the trigger is pulled.
To toggle the backlight brightness, press the

Light

softkey.

The backlight can be disabled using the Setup menu. See “Setup” for more

information.

Shop for Fluke products online at:

1.877.766.5412

www.

MyFlukeStore

.com

Содержание 56 Series



































Результаты поиска

Содержание 56 Series

Отзывы:

Похожие инструкции для 56 Series

Бренды по названию

Популярные бренды

Fluke 56 Series, Руководство пользователя

Результаты поиска

Содержание 56 Series

Отзывы:

Похожие инструкции для 56 Series

Бренды по названию

Популярные бренды