Fluke 4180ETRS, Руководство оператора

Страница: 14 / 44

4180ETRS
Operators Manual
10
Display
Table 3 shows the display.
Table 3. The Display

Process Temperature - The most recent block temperature measurement is
shown in large digits in the box at the top of the screen.

The current set-point temperature is displayed just below the Process
Temperature.

The current infrared thermometer emissivity setting (IRT
ε
) shown below the
current set-point temperature.
D
The current calibration wavelength (CAL
λ
) selected. The wavelength band at
which the Product was calibrated.
E
Stability Status - A graph shows the current status of the stability of the Product.
F
Heating/Cooling Status - A bar graph indicates HEATING, COOLING, or CUT-
OUT. This status graph indicates the current level of heating or cooling if the
Product is not in cutout mode.
G
Softkey Functions (not shown) - The four sets of text at the bottom of the display
indicate the functions of the softkeys ( F1 - F4 ). These functions change with each
menu.
H
During Product setup and use, you are often required to enter or select parameters.
Editing windows appear on the display to show the values of parameters and
allow edits.