manualshive.com logo in svg

Fluke 3014-PR, Инструкция, Страница: 1 / 6

Поделиться
Скачать
Fluke 3014-PR Скачать руководство пользователя страница 1

PN 3039221 
February 2008 
©2008 Fluke Corporation. All rights reserved. Product specifications are 
subject to change without notice. Printed in USA. 

®

 

3014-PR 

AC Current Clamp 

Instruction Sheet 

Introduction 

The Fluke 3014-PR AC Current Clamp (the Clamp) is a compact 
ac current clamp designed specifically for the Fluke 1750. 
Designed to meet the most stringent demands in industry and 
electrical contracting, it also meets the latest safety and 
performance standards. 

Symbols 

The table below lists the symbols used on the Clamp and/or in 
this instruction sheet. 

Symbol Description 

~

 

Do not dispose of this product as unsorted municipal 

waste. Go to Fluke’s website for recycling information. 

W

 

Risk of Danger. Important Information. See manual. 

X

 

Hazardous Voltage. Risk of electric shock. 

T

 

Double insulation. 

,

 

Application around and removal from HAZARDOUS 

LIVE conductors is permissible. 

@

 

Underwriters Laboratories. Conforms to UL Canadian 

and U.S. standards. 

P

 

Complies with the relevant European standards. 

;

 

Conforms to relevant Australian standards. 

Содержание 3014-PR







Отзывы:

Нет отзывов