3005-PR English Instruction Sheet
Page 3
Tactile Barrier
ezk01.eps
Figure 1. 3005-PR AC Current Clamp
Operating Instructions
1.
Connect the Clamp to the 1750 current input jack.
Verify that the 1750 has recognized that a current
Clamp is connected.
2.
Place the Clamp around the conductor under test.
3.
Observe and take measurements as required. Positive
output indicates that the current flow is in the direction
shown by the arrow on the Clamp.
Maintenance
Cleaning
Clean the Clamp periodically by wiping it with a damp cloth and
detergent. Do not use abrasive cleaners or solvents. Do not
immerse the Clamp in liquids.
Specifications
Electrical Specifications
Operating Range
5 A
Measurement Range
0.1 to 10 A
Transformation Ratio
Voltage Output
Output Signal
400 mV/A (2 V @ 5 A)
