Fluke 3000 FC, Руководство пользователя

Страница: 20 / 46

3000 FC
Users Manual
16
You can select up to 3 test tools and show their
measurements on the Product display. The Product stays
in the test tool selection mode for approximately
2 minutes.
To select a test tool:
1. Push

to move the highlight to the next ID
number in the list.
Note
The radio button (

) on the test tool that is
highlighted in the list flashes at a faster rate.
This helps to identify the test tool.
2. Push

. The highlight of the selected ID number
is inverted.
You can wait for the selection time to complete
(~2 min.) or push and hold

for 1 second to end
the selection mode.
3. Repeat steps 1 and 2 to select up to 3 test tools.
Note
To pair with a test tool after the discovery
procedure has completed, turn off the radio.
Turn on the radio to restart the discovery
procedure.
When in the Tool (receive) mode:
•
display updates to show the live measurement of the
selected test tool (up to 3)
•
the

button blinks at 4 to 5 second intervals on the
Product and each selected test tool
•
the

button on each non-selected test tool does not
blink
12.41
23.07
24.10
VDC
Auto
2
1
VDC
ADC m
To verify which measurement in the display of the
Product belongs to which test tool, look for the test tool
with the same ID number on its display. Or, push

to
highlight a test tool in the list. The

button on the test
tool blinks at a faster rate.