Fluke 1730, Руководство пользователя

Страница: 11 / 62

Energy Logger
Safety Information
3
•
Use Product-approved measurement
category (CAT), voltage, and amperage
rated accessories (probes, test leads, and
adapters) for all measurements.
•
Do not use test leads if they are damaged.
Examine the test leads for damaged
insulation and measure a known voltage.
•
Do not use the Product if it is damaged.
•
The battery door must be closed and
locked before you operate the Product.
•
Do not work alone.
•
Use this Product indoors only.
•
Do not use the Product around explosive
gas, vapor, or in damp or wet
environments.
•
Use only the external mains power supply
included with the Product.
•
Do not exceed the Measurement Category
(CAT) rating of the lowest rated individual
component of a Product, probe, or
accessory.
•
Keep fingers behind the finger guards on
the probes.
•
Do not use a current measurement as an
indication that a circuit is safe to touch. A
voltage measurement is necessary to know
if a circuit is hazardous.
•
Do not touch voltages >30 V ac rms,
42 V ac peak, or 60 V dc.
•
Do not apply more than the rated voltage,
between the terminals or between each
terminal and earth ground.
•
Measure a known voltage first to make
sure that the Product operates correctly.
•
De-energize the circuit or wear personal
protective equipment in compliance with
local requirements before you apply or
remove the flexible current probe.
•
Remove all probes, test leads, and
accessories before the battery door is
opened.
Shop for Fluke products online at:
1.877.766.5412
www.
MyFlukeStore
.com