TST-40M-HC40 / TST-100M
Instructions
2
Safety Information
A
Warning
identifies conditions and procedures that are dangerous to the user. A
Caution
identifies conditions
and procedures that can cause damage to the Product or the equipment under test.
W
Warning
To prevent personal injury:
•
Read all safety information before you use the Product.
•
Wear eye protection.
•
Use the Product only as specified, or the protection supplied by the Product can
be compromised.
•
Carefully read all instructions.
•
Do not use the Product if it operates incorrectly.
•
Do not use the Product if it is altered or damaged.
•
Disable the Product if it is damaged.
•
Do not attempt to operate the Product above its rated pressure.
•
Use care when working with this Product. Do not drop the product or strike it with
sharp objects.
•
Do not disconnect tubing with the system pressurized.
Symbols
The symbols shown in Table 1 are found in these instructions or on the Product.
Table 1. Symbols
Symbol Definition
W
WARNING, RISK OF DANGER.
Consult user documentation.
)
Certified by CSA Group to North American safety standards.
P
Conforms to European Union directives.
Conforms to relevant Australian Safety and EMC standards.
This product complies with WEEE Directive marking requirements. The affixed label indicates that
you must not discard this electrical/electronic product in domestic household waste. Product
Category: With reference to the equipment types in the WEEE directive Annex I, this product is
classed as category 9 “Monitoring and Control Instrumentation” product. Do not dispose of this
product as unsorted municipal waste.
