Fluke Biomedical 190M III Series, Руководство пользователя

Страница: 12 / 84

190M Series III
Users Manual
4
How to Use the Test Tool
This section provides a step-by-step introduction to the scope and meter functions of the test
tool. The introduction does not cover all of the capabilities of the functions but gives basic
examples to show how to use the menus and perform basic operations.
Test Tool Power
See Figure 1 to power the test tool from a standard ac outlet. See Battery Life for instructions on
using battery power.
Turn on the test tool with
O
.
The test tool powers up in the last setup configuration.
The menus to adjust date, time, and information language are switched on automatically when
the test tool is powered on for the first time.
Figure 1. Powering the Test Tool
Test Tool Reset
To reset the test tool to the factory settings:
1. Turn the test tool off.
2. Press and hold U .
3. Press and release
O
.
The test tool turns on. Wait to hear a double beep that indicates the reset is successful.
4. Release
U
.
3
2
1