Fluidwell F053-A, Руководство пользователя

Страница: 33 / 52

Page 33
FW-F053-A-M_v0404_01_EN.docx
11 12
an approved
associated
apparatus
4 5 6
an approved
associated
apparatus
9 10
an approved
associated
apparatus
7 8
an approved
associated
apparatus
optional
hazardous
location
apparatus
Certification F0-SERIES – Type -XI
Certificate number: CSA.08.2059461
Intrinsically Safe for Class I/II/III, Division 1
Groups A,B,C,D,E,F,G. Temperature class T4
Class I, Zone 0, AEx ia IIC T4
Project ID: 3033306
Intrinsically Safe for Class I/II/III, Division 1
Groups A,B,C,D,E,F,G. Temperature class T4
Class I, Zone 0, AEx ia IIC T4
HAZARDOUS AREA
SAFE AREA
Control drawing number: FWCD-0001
Revision: 1.1 Date: May 5
th
, 2014
optional
hazardous
location
apparatus
1 3 2
an approved
associated
apparatus
Control Drawing F0xx-A-XI

The installation must comply with national requirements (e.g. in Canada, the Canadian Electrical Code, Part 1
Appendix F and in USA, the National Electrical Code, NFPA 70, Article 504 and ANSI/ISA-RP 12.6).

Warning: Substitution of components may impair intrinsic safety.

For the circuits connected to terminals 1 and 2, 4 and 5, 7 and 8, 9 and 10, the output parameters of the
connected barriers (up to 4) or hazardous location apparatus must meet the following requirements:
Voc
≤ The lowest Vmax of the CSA / FM Approved apparatus in the circuit
Isc
≤ The lowest Imax of the CSA / FM Approved apparatus in the circuit
Pmax
≤ The lowest Pmax of the CSA / FM Approved apparatus in the circuit
Ca
≥ The sum of the cable capacitance and the internal capacitance Ci of each CSA / FM Approved
apparatus installed in the circuit
La
≥ The sum of the cable inductance and the internal inductance Li of each CSA / FM Approved
apparatus installed in the circuit

For the circuits connected to terminals 1 and 2, 4 and 6, 7 and 8, 11 and 12, the input parameters of the
connected hazardous location apparatus must meet the following requirements:
Vmax
≥ The Voc of the of the circuit
Imax
≥ The Isc of the circuit
Pmax
≥ The Pmax of the circuit
Ci
≤ The difference between the Ca of the circuit and the sum of the cable capacitance and the internal
capacitance Ci of all other CSA / FM Approved apparatus installed in the circuit
Li
≤ The difference between the La of the circuit and the sum of the cable inductance and the internal
inductance Li of all other CSA / FM Approved apparatus installed in the circuit

Hazardous Location Apparatus
– switches, thermocouples or non-inductive resistance devices, or CSA / FM –
Certified Apparatus
– should be connected in accordance with the manufacturer’s installation instructions.

The cable parameters are determined by the parameters of the system into which the F0-Series General Purpose
Indicators is connected.

Only certified Intrinsically Safe Fluidwell battery type FW-LiBat-0xx may be used and replaced in hazardous area.
The entity parameters for F0-Series General Purpose Indicators, model F0xx-A-XI, are as follows:
Terminals 1 and 2
– Input parameters:
Vmax = 30 V Ci = 0 nF
Imax = 150 mA Li = 0 mH
Pmax = 0.92 W
Terminal 3
– Internally not connected
Terminal 4 and 5
– Input parameters – Type -PD/-PX
Vmax = 30 V Ci = 0 nF
Imax = 200 mA Li = 0 mH
Pmax = 1.2 W
Terminal 4 and 6
– Output parameters – Type -PD
Voc, Isc, Pmax, Ca and La are equal to those of the
circuitry connected between terminals 4 and 5.
Terminal 7 and 8
– Input parameters – Type -OT
Vmax = 30 V Ci = 0 nF
Imax = 200 mA Li = 0 mH
Pmax = 1.2 W
Terminal 9 and 10
– Input parameters – Type -ZB
Vmax = 30 V Ci = 0 nF
Imax = 200 mA Li = 0 mH
Pmax = 0.75 W
Terminal 11 and 12
– Input parameters – Type -AH
Vmax = 30 V Ci = 6.1 nF
Imax = 100 mA Li = 0 mH
Pmax = 0.75W
common ground
TERMINAL CONNECTORS F0-SERIES
5.2.3 ELECTRICAL DATA
– CONTROL DRAWING