7
1.
2.
Note:
3. Turn the pump on.
4. Turn the regulator valve adjustment knob clockwise to increase
fl
ow or
5.
6.
7. Turn the pool pump on.
Figure 11
.
Figure 11
calculate the cleaner speed and adjust RPM as needed.
1. While the cleaner is running, bring the cleaner up to just beneath the pool’s water surface.
Note:
into the pool system.
2.
3. For proper performance, the S5™ cleaner operates between 11-13 RPM.
If the RPM is higher than 13 adjust the regulator valve (rotate adjustment knob counterclockwise) and repeat steps
CLEANER ADJUSTMENTS AND OPERATION
Hose Length
Note:
The pump must be on when you check the
hose length. The hose contracts when the pump is
1.
2. The hose should be long enough to reach the end
hose. See
Figure 12
.
3. Remove any excess hose lengths from the middle
of the hose assembly. This will ensure you do not
4. Save
replacement.
Note:
Turn pool pump o
ff
when adding or
Figure 12
