fluidra 74148, Руководство пользователя

Страница: 24 / 222

20
Code Name Scope Default Remark
P0 Manual defrost 0-1 0 1 Manual defrosting mode, 0 Normal mode
P1 Working mode 1 1 1 Heating mode (Non-adjustable)
P2 Timer on/off 0-1 0
1 Timer on/off is under function
，
0 Timer on/off is out of function (The
setting of P5 and P6 won’t work)
P3 Water pump 0-1 0 1 Always running, 0 Depends on the running of compressor
P4 Current time HH:MM 00
：
00 0-23:0-59
P5 Timer on HH:MM 00
：
00 0-23:0-59
P6 Timer off HH:MM 00
：
00 0-23:0-59
P7
Inlet water temp.
correction
-9
～
9
0 Default setting: 0
NOTE: Under defrosting mode, P0=1.
After defrosting finished, it will be automatic enter Normal mode, P0=0.
6.2.4 Heating priority (see the paragraph 6.9), option of connection
Option 1; P3=0 Filtration pump is related to heat pump operation to start and stop.
Filtration pump starts 60s before compressor, filtration pump start 30s and then the water flow switch detect flow.
Before the heat pump enters into Standby mode, the compressor stops first and after 5 minutes filtration pump stops.
Condition Example Water pump working logic
Heating
mode
P3=0,
T1≥Tset-0.5℃,
last for 30
minutes
P3=0,
T1≥27.5℃,
last for 30
minutes
1. Then it enters into
standby mode for 1 hour
(It will not restart except
turn it on manually.)
2. After 1 hour, the filtration pump
will restart for 5 minutes. If the
T1≤27
℃
, the heat pump will start
to work until T1≥27.5
℃
and last for
30 minutes to go into standby
Option 2; P3=1 Filtration pump is always on, P2=0 the timer function is no active
Under condition P3=1, whenT1≥Tset+1
℃
(T1≥29
℃
) last for 3 minutes, heat pump will be in standby, while filtration
pump is always on.
Under option 2, with activation of the timer; P2=1 to start and stop the filtration pump according the programming
of the P4 (time), P5 (timer ON) and P6 (timer OFF)
Condition for the heat pump start, timer ON actives;
When the timer reaches
the set time of TIMER ON
, the filtration pump will start and after 5 minutes the heat pump
start. The heat pump stays in stop if the water in temperature is ≥ Tset+1
℃
, before the TIMER OFF, the filtration is
still activated.
Condition to stop the heat pump, timer OFF actives;
When the timer reaches the set time of the TIMER OFF, the heat pump will stop and after 5 minutes the filtration
pump stops.
NB; Symbol of automatic TIMER start , the light will be on when it is in operation, symbol of automatic TIMER
stop , the light will be on when it is in operation. Outside the time operation the display will be advise by OFF.
If heat pump is turned ON/OFF manually, the filtration pump will start and stop accordingly.
NOTE :
Tset = Tseting water temperature
For example : Tset = 28
℃
Tseting water temperature in your pool heat pump
Tset-0.5 = less 0.5
℃
than Tseting temperature, Tset- 0.5 = 28-0.5=27.5
℃
Tset+0.5= more 1
℃
than Tseting temperature, Tset+ 0.5 = 28+0.5=28.5
℃