4
STEP 2:
REMOVE OLD PARTS
A: REMOVE CONNECTOR
Remove water supply
connector from bottom of fill valve.
E: REMOVE TANK FROM BOWL
Use
green tool
to unscrew nuts from
under the bowl and remove bolts
from tank.
G: REMOVE GASKET
Remove tank-to-bowl gasket from
below the tank.
F: LAY TANK ON ITS SIDE
Place on a safe and secure surface.
H: REMOVE FLUSH VALVE
LOCKNUT
Using
red wrench
, twist locknut
to remove. Remove old flush valve
from tank.
B: REMOVE OLD LOCKNUT
Use
green tool
to twist locknut below
tank to remove locknut from fill valve.
C: REMOVE OLD FILL VALVE
Including refill tube, refill clip and
shank washer.
Drain any excess
water into the back panel of
empty packaging
by removing fill
valve from tank. (Pull fill valve up)
D: DISCONNECT
FLAPPER CHAIN
Towel
(Optional)
NOTE: Inspect water
supply connector. Replace it if
it is worn, or you don’t know
how old it is, to prevent flooding
and property damage.
5
Screwdriver
(Optional)
Red Wrench
Green Tool
Green Tool
NOTE: Bolts can be
loosened from inside tank.
Tank Lever
