Page 10
With the rest of the suspension lines you finalize the closing of the inner container by pulling
the suspension lines through the black rubber loop. Now the packing is finished.
Make a note of the date of packing in the pack control booklet.
Installing your rescue handle
Most harnesses have a handle for the harness containers. This handle must be connected to
the inner container.
The inner container of
ALFAcross*100
rescue systems has two loops, in which the handle of
the harness can be attached (center, side).
Handles for front and back containers are generally suspended in the central loop, container
on side or under the seat, the side strap used.
Note the instructions for the rescue unit in the operating instructions of your harness.
If there is no handle of the harness or it does not fit with your inner container, please
ask the dealer of your harness or your paragliding school.
The handle must be firmly connected to the loop on the inner container (opening
strength < 70 N).
Connection the ALFAcross*100 with the harness
When fitting the ALFAcross*100 in the harness/front container, make sure you follow the
harness manufacturers instructions. Perform a complete system compatibility test. This test
must be undertaken by a suitable qualified person.
PRE FLIGHT CHECK: In addition to the normal pre-flight check( see operating instructions of
the harness) the proper closure of the rescue container and the correct location of the
deployment handkle must be checket before each take off. If the bridle is disconnected after
every flight ( for example, on a front-mounted container system) the pre-flight check must
also include the correct attachment of the bridle.
