- 10 -
SeTUP
Installing the Rubber Foot Pads:
You may also use the Rubber Foot Pads instead of using the Metal Foot Spikes. The rubber pads
have self-adhesive which holds them in place on the bottom of the Music System.
1. Remove one Rubber Foot Pad from the adhesive backing.
2. Place the pad approximately 1 inch beside the screw hole on the bottom of the Music
System as shown in the diagrams below.
3. Repeat steps 1 and 2 for all of the remaining Rubber Foot Pads.
DO NOT COVER HOLES WITH
RUBBER FOOT PADS
