C STORM 2.5
OPERATION GUIDE
FZVACD-2.5
© WESSOL, LLC 2022
TROUBLESHOOTING
COMMON SOLUTIONS
PROBLEM
POSSIBLE REASON(S)
SOLUTION
Sprayer is not turning on
and there is no sound
coming from the sprayer
Dead battery
Charge the battery. If the battery will not charge, test the charger or call Support at +1
803.339.2500 for a replacement if applicable.
Loose/worn connections on
power switch
Remove back cover plate. Using pliers, move all three wires on the power switch over to
the neighboring side, to the extra set of wire contacts.
Defective micro-switch
Purchase replacement part or contact Support for help.
Defective circuit board
Purchase replacement part or contact Support for help.
Leaks from gun/nozzle
area
Loose connection
Ensure spray gun is fully tightened onto threaded end of the hose.
Missing or worn gasket
Contact Support or go to fzspray.com to purchase replacement gaskets.
Clogged pump / hose / gun
/ wand / nozzle.
Not rinsing tank / pump / hose /
gun / nozzle(s) with water
after use.
Rinse sprayer throughly with warm, soapy water after each use.
Dead battery
Defective charger
If the LED indicator lights do not turn on or only one red LED is on after being on
charger for over 2 hours, test the charger using a multimeter. Replace if necessary.
Damaged lithium cells
If the battery receives no reading from a multimeter, a replacement battery is needed.
Pump makes a sound when
sprayer is on and output is
Clog in filter or nozzle
Check filter or nozzles for clog. Using warm water, throughly clean the components.
Clog in pump
Open the pump and clean. Contact Support for assistance.
Leak from sprayer tank
Loose hose-pump connection
Open cover plate and identify the hose clamps. Use a flathead screwdriver to tighten.
Damage on pump
Replace the pump.
Damage on tank
Replace the sprayer tank.
If your sprayer is experiencing trouble, see below or visit
fzspray.com/
troubleshoot
for detailed instructions/videos on how to determine
which part is not functioning.
To contact Technical Support, email
.
14