Copyright © WESSOL, LLC
Attach the metal clips to the loops in the bottom
corners of the sprayer. Thread the top belt
buckles through the sprayer loops then back into
the buckle. Tighten, make sure they are secure.
Next, adjust the ComfortStraps™ (5) to your fitting
by buckling the waist and chest belt. Adjust as
needed. Please visit fzspray.com/comfortstraps
for assembly instructions and video.
Place the top wand holster (4 left) on the proper
location on tank. While holding the holster, place
a nut on one side of the hexagonal slots and screw
the bolt through the other side until it fastens into
the nut. Repeat for other slot and bottom holster.
Take the spray gun (10) and twist on to the
threaded fitting on the end of the hose (7). Tighten
the fitting to ensure the gasket properly seals the
connection.
If spraying with the stainless-steel spray wand
(6), pull back on the collar of brass quick-connect
fitting on the spray gun. Insert the male wand
fitting into the female spray gun fitting and push
the collar back into its original position. Nozzles
can be attached with the same process.
Snap the spray wand into the wand holster and
place any unused nozzles into their slot (4 left)
until ready to spray.
STEP 1.
ASSEMBLING SPRAYER
A)
C)
B)
D)
E)
8
Required tools: phillips head screwdriver
Before you begin, open the tank lid and remove the nuts and bolts, holsters, and nozzles from inside the intake filter. Set aside.
