Flowserve StarPac 3, Инструкция пользователя

Страница: 51 / 60

51
StarPac Intelligent Control System FCD VLENIM0066-02 02/10
flowserve.com
®
Table XVII: Pressure Sensor Hardware Kits
Item No. Description Quantity
Kit 5 - Pressure Sensor Connection Kit Configuration, Part No.
134555.999.000
3 Swagelok nut 2
4 Swagelok ferrules 2
5 Sensor nut 2
6 Environmental O-ring, Viton® 2
7 Division II sensor fitting 2
NOTE: Kit will service two pressure sensors. For class I,
Division II, Group A, B, C, & D. See Table XIIX for Tubing.
Item No. Description Quantity
Kit 6 - Remote Mount Pressure Sensor Hardware Kit, Part
No. 134557.999.000
3 Swagelok nut 4
4 Swagelok ferrules 4
15 Temperature extended fitting 2
19 Adapter fitting 2
NOTE : Kit will service two remote-mount pressure sensors. See
Table XIIX for tubing. (Wet-leg tubing wall thickness must be
0.065-inch).
Item No. Description Quantity
Kit 7 - Remote Mount Pressure Sensor Hardware Kit with
Purge and Isolation Valves, Part No. 134558.999.000
3 Swagelok nut 4
4 Swagelok ferrules 4
15 Temperature extended fitting 2
16 Purge valve 2
17 Isolation valve 2
19 Adapter fitting 2
NOTE: Kit will service two remote-mount pressure sensors. See
Table XIIX for tubing. (Wet-leg tubing wall thickness must be
0.065-inch).
Item No. Description Quantity
Kit 8- Pressure Sensor Electrical Cable Replacement Kit,
Part No. 134563.999.000
1 Electrical connector cable 2
22 Four-pin connector 2
23 Wire crimp terminal 16
NOTE : Kit will service two pressure sensors.
Description Quantity
Kit 9 - Pressure Sensor Electrical Extension Cable, Part
No. 127645.999.000
Electrical connector extension cable
1
Description Quantity
Kit 10 - Pressure Sensor Calibration Kit, Part No.
134564.999.000
Pressure sensor calibration fixture
1
Electrical connector extension cable 2
O-ring seal, Viton 2
Description Quantity
Kit 11 - DP Cell Manifold Replacement, 3-Valve,
Part No. 134564.999.000
Valve Manifold
1