4
© 2015 Flowrox Oy. All rights reserved.
Contents are subject to change without notice.
SKW/ SKF-2015-09-ENG
1
DIRECTIVE CONFORMANCE DECLARATIONS
FLOWROX OY
Marssitie 1
P.O. Box 338
FI-53101 Lappeenranta
Finland
Tel. +358 201 113 311
hereby declares that the
Flowrox Slurry
Knife Gate valve, Wafer (SKW) and Slurry Knife Gate valve, Flanged (SKF)
comply with the following applicable regulations:
Pressure Equipment Directive 97/23/EC (PED):
Valves according to article 3, clause 3 (SEP); no CE-marking for conformity with PED.
European Union Machinery Directive 2006/42/EC and
Finnish Government Decree on Machine Safety, 400/2008, Machine Decree (koneasetus):
Annex IIB “partly complete machine”. No conformity with directive when valve is actuated manually.
Atex Directive 94/9/EC:
Conformity to directive declared only if Ex and CE are marked on valve nameplate. In that case a
separate Atex declaration is supplied.
Do not operate valve before conformity to machine directive 2006/42/EC has been declared for the
complete machine (pipeline) to what the valve is installed as a partly complete machine. Follow the
valve installation instructions in this manual. Conformance declarations for accessories (solenoid valve,
limit switches etc.) and actuators are supplied separately in component documentation. Risk analysis
responsible employee at Flowrox Oy is Jarmo Partanen.
On behalf of Flowrox Oy
In Lappeenranta, 1 September 2015
Jukka Koskela
President and CEO
