7
Turning-on the Aviafit™
1. Using
Figure 7
below as a guide, press the
ON/OFF
button
located on the front of the device.
The green LED (
Figure 1
) turns
ON
.
Figure 7:
To turn ON press the
ON/OFF Button
2. Wait for the device to tighten around the calf muscle. This
may take up to 60 seconds. Tightening will last for approximately
4-10 seconds.The sensation caused by the tightening of the device
may take a few cycles to get used to.
3. The Aviafit™ device will repeat the tightening action
approximately every 60 seconds until the device is switched
OFF
.
Removing the Aviafit™ from your Leg
1. While the device is on and using
Figure 7
as a guide, press
the
ON/OFF
button to turn-off the device power.
Figure 8:
To turn OFF press the
ON/OFF button
While powering-off, the green LED continues to blink for up
to 60 seconds. During this time another tightening action
may occur.
When the Aviafit is in the process of powering-off you may remove
it from your leg.
2. Release the fastener of one end of the strap.
3. Pull the strap out of the device buckle and remove the units
4. Store the devices in their storage bag.
