Flow 050624-1, Руководство по установке

Страница: 1 / 10

SB-0258 Rev A Status: PRODUCTION
1 of 9

2011 Flow International Corporation
UNCONTROLLED COPY PRINTED 7/29/11
SB-0258
Installing the HyPlex ® Prime
Minor Maintenance Kit
Introduction
Use the procedure in this service bulletin when installing the Minor Maintenance Kit on your HyPlex
Prime pump. The complete minor maintenance kit schedule is listed in your Flow service manual.
Tools
You will need the following tools:

Pressure loading tool (049512-1)

Combination wrenches (14–32 mm)

½ in. drive socket set (14–32 mm)

½ in. torque wrench (10–200 ft-lb)
Note: you may need two wrenches

Pry bar set

Screwdriver set

Snap-ring pliers

0–1 in. micrometer or dial calipers
Repair kit
Minor maintenance kit, 050624-1
CAUTION
Failure to follow these step-by-step instructions and the procedures in your
equipment manual could result in premature failure or equipment damage.
Note : All components should be clean and free of debris prior to assembly. A clean work area is
important while working on the equipment.