Battery Information
Battery Requirements
• Aqualand Cruiser: 9.6V rechargeable battery pack (two included)
• Remote control: one 9V battery (purchase separately)
Battery Precautions
• Batteries should be installed by adults only.
• Do not mix old and new batteries.
• Do not mix alkaline, standard (carbon zinc) or rechargeable
(nickel-cadmium) batteries.
• Dispose of exhausted batteries promptly and properly. Do not burn
or bury batteries.
• Use only fresh batteries of the required size and recommended type.
• Do not leave exhausted or weak batteries in the Aqualand Cruiser
or the remote control. Batteries can leak chemicals that can damage
electronic parts. If the Aqualand Cruiser and the remote control have
not been used in a week or more, remove all the batteries.
6
7
Charging the Battery Pack
The Aqualand Cruiser uses a 9.6V battery pack (two are included).
Caution! Important:
• Be sure to charge the battery pack for 5 to 6 hours before using the
Aqualand Cruiser.
• Do not charge or recharge the battery pack while it is in the
Aqualand Cruiser.
• Do not use the battery charger in wet or hot weather conditions.
• Use only the recommended battery pack and charger.
• To avoid damaging the battery pack when you disconnect the battery
pack from the charger, do not pull on the connector’s wires.
• To safely recharge the battery pack after using the Aqualand Cruiser,
allow the unit and battery pack to cool completely before recharging.
• After you charge or recharge the battery, disconnect it from the
charger. Overcharging the battery pack may damage it.
• Before operating the Aqualand Cruiser, ensure the battery
compartment cover is secure.
AL Cruiser booklet 8/2/05 1:51 PM Page 7
