FP-3251
1/4" STRAIGHT HANDLE DRILL
Parts Breakdown for FP-3251
FP-3251
1/4" STRAIGHT HANDLE DRILL
Ref. Description Part #
Ref. Description Part #
Florida Pneumatic’ s Limited Warranty
Florida Pneumatic warrants their tools to be free from defects in material and workman-
ship for one year from the date of purchase. This warranty does not apply to tools
which have been abused, misused, modified or repaired by someone other than Florida
Pneumatic or their authorized service centers. If a Florida Pneumatic tool proves
defective in material or workmanship within one year after purchase, return it to any
authorized service center or Florida Pneumatic freight prepaid. Please enclose your
name, address and adequate proof of purchase and a short description of the defect.
Florida Pneumatic will, at their option, repair or replace defective tools, free of charge.
Repairs or replacements are warranted as described above for the remainder of the
original warranty period. Florida Pneumatic’s sole liability and your exclusive remedy
under this warranty is limited to repair or replacement of the defective tool. There are
no other warranties expressed or implied and Florida Pneumatic shall not be liable for
incidental, consequential or special damages, or any other damages, costs or expense
of repair or replacement as described above.
Specifications
Replacement Parts for FP-3251
- Never use tool without proper eye protection.
Chuck capacity.....................................................................................................................1/4"
Free speed...........................................................................................................20,000 RPM
Spindle size.................................................................................................................3/8"- 24
Length................................................................................................................................6½"
Weight......................................................................................................................... 1
5
/
8
lbs.
Air inlet.....................................................................................................................1/4" NPT
Recommended hose size........................................................................................3/8" I.D.
Average air consumption..........................................................................................4 CFM
Maximum operating pressure..................................................................................90 PSI
14
•
Vane (4)
116210
15 Spacer
117140
16 Spring
118020
17 Trigger valve body
120120
18 Trigger valve stem
120230
19 Throttle lever
120330
20 Handle Assembly
*262376
21 Chuck key
5914
22 1/4" Chuck w/ key
5925
( ) 300 Motor unit complete
425320
(
•
) Tune up kit
200 Kit
1
Barrel
101010
2
Bearing carrier (2)
102010
3
•
Bearing (2)
102020
4
Cage
103010
5
Lock nut
108050
6
Retaining pin
111220
7
Retaining pin
111230
8
Front end plate
113010
9
Back end plate
113120
10
•
O-Ring
115120
11
O-Ring (2)
115160
12
Stop ring
115210
13
Rotor
116040
