Attach the pendulum
Ensure the point in front is exactly positioned in the conical
hole and the one at the back sits in the slot.
Installing the Time Machine TM3
Fabrical GmbH · Florian Schlumpf Swiss Timemaker
Sihlbruggstrasse 107 · 6340 Baar · Phone +41 78 613 19 16 · [email protected] · www.schlumpf.swiss
Watch the position of the anchor pallets
The anchor pallets should have the same engagement in
each position. This may be regulated by adjusting the foot
screws. Only adjust the anchor pallets if necessary!
Adjusting the foot
Adjust the foot so the pendulum hangs straight and the
foot stands on the floor on all its screws.
The Time Machine is standing straight, when both pendu-
lum rods are positioned in the same distance to the wind-
ing spindle.
