2
EN
Dear
Customer!
May
we
congratulate
you
on
your
new
Greenhouse.
We feel sure that by following the detailed assembly
instruc ons you will
fi
nd as much pleasure in actually
building the greenhouse as the me you will spend in
your greenhouse in the future.
The assembly instruc ons mainly consist of detailed
illustra ons and no speci
fi
c technical knowledge is
required for the assembly of the greenhouse.
However, it is important that the assembly instruc ons
are followed strictly. The pro
fi
les in carton box are
packed in separate numbered packages corresponding
to the order in the assembly instruc on. Erect one
pack at a me. Don’t mix the contents of di
ff
erent
packs. All of the aluminum pro
fi
les are marked with a
part number corresponding to the numbers given on
the draw
‐
ings and in the parts list. Nuts, bolts and
fi
ngs will be found in the relevant package.
Precau ons
•Always try to select a sunny loca on, sheltered from
the wind as much as possible. Assembly must only be
carried out in dry and calm weather.
• Always use working gloves while handling aluminum
pro
‐
fi
les and polycarbonate.
• Place the ladder on a level support.
• It is essen al to have an assistant.
Tools
• Spirit level;
• Spanner or wrench 8 and 10 mm, screw driver
normal and crosshead PH2;
• Electric drill.
Winter
Protec on
• Support the roof ridge at the centre of the
greenhouse.
• Remove greater snow loads from the roof.
• Take precau ons against snow falling down from
trees or a house roof.
• Dismount the cylinders for the automa c window
openers, if any (op onal extras).
• Secure doors and windows preven ng wind damage
to the greenhouse.
Insurance
Please note that not all insurance companies cover
green
‐
houses automa cally. Please contact your
insurance company to ensure an insurance coverage.
Guarantee
Manufacturer gives a frame guarantee which covers
replacement or repairs of defec ve parts due to
material or manufacturing fault. Moving and painted
parts, glazing and damage caused by wind or other
extreme weather condi ons are excluded.
The guarantee does not cover, assembly, freight etc.
The guarantee is invalid if the greenhouse is not
assembled according to these instruc ons.
Complaints
We put severe demands on quality to secure that you
get a faultless product. However, should a problem
occur, we kindly ask you to contact the dealer from
whom you have bought the greenhouse. For a quick
service, you should specify the defect by means of the
parts list in the assembly instruc ons. Please also note
the model number which is stamped on the front page
of these instruc ons.
Tips
1. The base anchors has to be fastened/concreted into
the ground.
2. The base has to be 100% level and square. The
easiest way to ensure this is to make sure that the two
diagonal measurements are equal.
3. We recommend that you grease screws for doors
and windows for easier assembly.
4. If desired, it is possible to seal the greenhouse at the
edges and conners, also gap between polycarbonate
and gu er, using neutral silicon.
5.
Polycarbonate
—the UV
‐
protected side (outside) of
the sheet is covered with opal white/text marked
fi
lm
and must be faced towards the sun. Remove
approximately 2 inches of
fi
lm from all sheet edges
before installing. Remove all
fi
lm immediately a er the
construc ons is completed. Polycarbonate plates must
not come into contact with the ground. Always rest
them on cardboard or similar material during
construc on.
Maintenance
• Grease doors (hinges and lock or door track).
• Clean the gu er for leaves, etc.
• Adjust windows and doors.
• Clean the greenhouse before and a er the growing
season. Use only gentle detergents and so cloth
(please check
fi
rst if the detergent does not react ag
