Florence MyPackageConcierge, Руководство по установке

Страница: 4 / 8

Page 4 of 8 MyPackageConcierge® Installation Guide—206562—Rev F www.florencemailboxes.com
Preparing For and Installing Your MyPackageConcierge®
Rough Opening Verification
A.
Confirm the opening is plumb and level.
•
NOTE : It is critical the bottom is level and it does not slope to the interior.
B.
Remove dirt, oil, and debris from the opening and surrounding wall surfaces.
C.
Confirm the MyPackageConcierge® will fit the opening.
•
NOTE: 1-1/2”, or more, of solid wood blocking is required around the perimeter of the
opening.
1).
Measure all four sides of the rough opening to make sure it is 36-1/2” in height and
16-1/2” in width.
2).
Fix any problems with the rough opening before proceeding.
Prepare The Opening
A.
Install a Water Resistive Barrier (WRB) prior to installation of the MyPackageConcierge® and
seal around the rough opening using standard practices.
• Under extreme wind/water exposure, incidental water that migrates behind the WRB due
to penetrations, fasteners, or cladding attachment may migrate into the package box
rough opening. Take steps to mitigate this potential by creating a water seal between
the WRB and sheathing at the rough opening.
Setting And Fastening Your MypackageConcierge®
A.
Unlock the door on MyPackageConcierge®
1).
Input the access code into the combination lock
•
The initial access code, when shipped from the factory, is 12345.
2).
Turn the knob clockwise and pull to open the door.
B.
Inspect and clean the back side (interior surface) of the exterior MyPackageConcierge®
integrated trim.
COMBINATION
ACCESS LOCK