FLORABEST 275664, Перевод оригинальной инструкции

Страница: 15 / 92

15
IE GB
Do not use cleaning agents or solvents.
You may otherwise irreparably dam-
age the appliance.
General maintenance
• Prior to every use, check the appliance
for obvious defects such as loose, worn
or damaged parts.
Check that the screws in the cutting
disk are tight.
• Check covers and safety devices for
damages and correct installation. Re-
place as necessary.
Removal of clogging
and blockage
Leaf material and fresh plant parts may
clog / block the device.
Cleaning the impeller wheel:
Pull out the mains plug!
There is a risk of injury!
1. Remove the protective cover (7) and/or
the suction tube (16).
2. Carefully remove residues or clogging
materials from the impeller wheel.
3. Check to make sure the impeller wheel
is easier to turn and is in undamaged
condition. Have our Service Centre re-
place a defective impeller wheel.
4. Retighten the protective cover (7) and/
or the suction tube (16).
If the protective cover (7) and/or
the suction tube (16) is not correctly
screwed into place by hand, it is not
possible to operate the device.
Storage
• For storage purposes you can remove
the blow tube ( 9) and/or the suction
tube ( 16) and the catcher ( 14)
from the motor housing ( 1) (see the
corresponding installation instructions in
the „Start-up” section).
• Store the device in a dry place well out
of reach of children.
Disposal and protection
of the environment
Be environmentally friendly. Return the tool,
accessories and packaging to a recycling
centre when you have finished with them.
Machines do not belong with
domestic waste.
Hand over the device at an utilization
location. The plastic and metal parts
employed can be separated out and
thus recycled use can be implemented.
Ask our Service-Center for details.
• Defective units returned to us will be
disposed of for free.
• Throw the cut grass on the compost. Do
not throw it in the normal household
waste.