![FLORABEST 275655 Скачать руководство пользователя страница 13](http://html1.mh-extra.com/html/florabest/275655/275655_translation-of-the-original-instructions_2307168013.webp)
FAHE 18 B2
■
10
│
GB
Mounting the saw chain and blade
WARNING!
►
Wear protective gloves! There is a risk of
injury from the sharp cutting teeth!
♦
Remove the two screws and remove the
sprocket cover.
♦
Place the sawing chain into the blade
groove.
♦
To install, hold the blade tilted at an angle
of approx. 45 degrees upward, and guide the
sawing chain around the chain wheel .
♦
Lay the guide rail over the blade guide
while inserting the chain tensioner pin in the
blade hole .
♦
Refit the sprocket cover and finger-tighten the
two screws.
NOTE
►
Make sure that the nose of the cover is inserted
into the designated notch on the device.
♦
Now you can tighten the saw chain (see section
Tightening and checking the saw chain).
♦
Then tighten the screws of the sprocket cover.
Tightening and checking the saw chain
WARNING!
►
Wear protective gloves! There is a risk of
injury from the sharp cutting teeth!
♦
Unscrew the two screws and remove the
sprocket cover .
♦
Using the assembly tool , turn the chain-
tensioner screw in a clockwise direction to
increase the tension.
♦
The saw chain must lie against the underside
of the blade. Check whether the saw chain can
be drawn by hand over the blade .
♦
Replace sprocket cover and finger-tighten
the two screws .
NOTE
►
Make sure that the nose of the cover is inserted
into the designated notch on the device.
NOTE
►
A new saw chain stretches and must be
tightened more regularly.
Lubricating the chain
♦
Remove the oil filler cap .
♦
Fill the oil tank with approx. 65 ml of organic
chain oil .
WARNING!
►
Never work without chain lubrication!
If the saw chain runs dry, the cutting equip-
ment may become irreparably damaged
within a short time. Always check chain
lubrication and oil level in the tank before
starting work.
NOTE
►
Use only saw chain oil. Preferably biodegrad-
able. Do not use waste oil, motor oil, etc.
►
While working, check whether the automatic
chain lubrication is working correctly. Check
the chain lubricator before and during work.
Sharpening the saw chain
NOTE
►
You will find detailed information on
sharpening in the sharpening set, e.g. from
Oregon.
►
Alternatively, you can use an electrical saw
chain sharpening device and follow the
instructions of the manufacturer.
►
If you have any doubts about implementing
the work, the saw chain should be replaced.
Содержание 275655
Страница 3: ...B A 2b...
Страница 19: ...16 GB FAHE 18 B2...