FLORABEST 270180, Инструкция по эксплуатации

Страница: 4 / 18

6
Congratulations!
With your purchase you have decided on a
high-quality product. Get to know the product
before you start to use it. Carefully read the
following instructions for use.
Use the product only as described and only
for the given areas of application. Keep these
instructions safe.
When passing the product on to a third party,
always make sure that the documentation is
included.
Scope of delivery
1 x Tabletop (1)
2 x Table frame, long side (2)
1 x Table frame, short side (3)
1 x Table frame with high adjustment device
on the short side (4)
2 x Strut (5)
16 x Screw/washer/cover cap (6)
1 x Allen key (7)
18 x Silicone cap (8)
1 x Instructions for use
Technical data
Weight: approx. 22.7kg
Size: 150 x 96 x 74cm (L x B x H)
Legs: 70 x 2 x 5cm (H x B x T)
Frame: 5 x 2cm
Maximum load capacity: 25kg
Correct use
The article is not intended for commercial use.
The article was designed for use in living areas,
e.g. balcony, terrace or garden.
Safety notes
Danger to life!
• Never leave children unattended with the
packaging material. There is a risk of
suffocation.
Risk of injury!
• Ensure the article is stable before use.
• Place the article on a level surface.
• The article may only be used under adult
supervision and may not be used as a toy.
• Inspect the article for damage or wear before
each use.
• Never stand or sit on the table.
• Secure the product in extreme weather
conditions, e.g. strong winds. Store the
product in protected rooms.
Assembly instructions
1. Place the tabletop (1) on a soft, flat surface
during assembly (caution: hard surfaces may
scratch the tabletop).
2. Connect the long frame section (2) of the
table frame to the short frame section (3/4)
(as illustrated). Now take 4 screws (6) and
screw them into the holes using the Allen key
(7). Secure the screws with the washers and
cover caps, as shown in figures B and C.
3. Repeat this process on the opposite side of the
table.
4. Place the two struts (5) on the table frame and
connect these using 4 screws each.
5. Place the 18 silicone caps (8) into the
matching holes on the table frame.
6. Carefully lay the tabletop on the table frame.
7. Adjust the height of the table by using the leg
with adjustable height for maximum stability.
Cleaning and maintenance
Care notes
Clean the article with a damp cloth and a mild
cleaning agent.
Storage
We recommend storing the article in a clean,
dry, temperature-controlled place when not in
use in order to enjoy the article for as long as
possible.
GB