Floorwash FB35, Руководство по использованию и обслуживанию

Страница: 19 / 24

19
FUNCTIONING
Check that all steps described above have been completed correctly before using the machine
Before starting the washing procedure with the machine, remove any solid residual such as dust
lumps, stones, glass, paper etc. from the surface which has to be treated.
1 After the engine has turned on, move the machine
back and forth with linear movements. The lever
placed beneath the handle will allow you to
dispense the liquid previously poured in the tank.
The engine of this appliance is equipped with a safety device which cuts it off in case of overload.
If this situation occurs, it is necessary to return the handle to its initial position, turn off the
battery and turn it on again, and then resume normal work. In the event that the engine does
not work again, contact our after-sales service.
Do not make circular movements with the machine so that it can collect the dispensed liquid.
2 After pulling the lever, the liquid will distribute
uniformly on the front cylinder brush.
In the ongoing stage just pull the lever halfway; in the retuning stage, release the lever, thus al-
lowing the liquid recovery.
In the returning stage, the machine shall pass through the same hallway of the ongoing stage,
thus allowing a complete recovery of the dispensed liquid.