- Using a suitable screwdriver remove the cover of the
receiver by pressing in the two tabs located on both
sides of the receiver.
- Attach the receiver to the wall/ surface using the slots
and screws provided.
- Attach the wires to the receiver (see wiring section)
- Place the cover back onto the receiver.
Note: Please do not use the key/slots for Permanent
Installation
Battery Installation:
Warning: Turn off the electrical devices and disconnect
the supply to the appliances before replacing the
batteries. Replace only with the same or equivalent
type of batteries. Do not dispose of the used batteries
with household waste. Refer to your local area for the
proper disposal.
1. Pull out the battery drawer
2. Place in the new batteries according to the marking
on the battery drawer.
5
Selecting the Temporary/ Permanent Override Mode
1. Press
<
>
to change the mode from normal to
Temporary Override.
icon will be displayed.
2. Press
<
>
again, the mode changes from Temporary
Override to Permanent Override mode.
icon will be
displayed.
3. Press
<
>
once, the mode changes from Permanent
Override to normal mode.
Review and adjust the Override temperature:
1. Press
< >, < >
the Override temperature is shown.
2. Hold the
< >, < >
for 2 seconds, the Override
temperature will flash.
3. Press
< >, < >
to adjust the Override temperature.
4. Press
<
>
to exit the Override temperature setting.
Or transmitter will auto-return to normal mode after 10
seconds.
Temporary Override Mode:
Temporary Override mode maintains until next
program time is met.
10
