Do not use the IP300 in an outdoor environment.
Do not place the IP300 other than the standing position. Do not lay it on its side or
stand on its front or rear panel.
Keep the IP300 away from corrosive gases.
Do not place the IP300 nearby high-voltage electronic devises. It may degrade the
performance of CPU board inside.
Do not operate the IP300 under direct sunlight.
Do not operate the IP300 in the environment where temperature fluctuates rapidly.
The room temperature must be within the range of 10C and 40C.
The acceptable voltage for the IP300 ranges from AC 100V to 240V (50/60Hz). Do not
deviate from this voltage range or it may cause fire or electric shock.
When you notice abnormality during the operation, turn off the main power switch
immediately and check the tube connections and the power cord. If no visible
problems are detected and the abnormality continues, contact FLOM Corporation
immediately.
Do not bent, step on, or stack heavy materials on the power cord. Do not bundle
power cords.
Do not place the IP300 nearby any heat sources. It may damage the IP300 or cause
fire.
Make sure to remove all the remaining solvents inside the IP300 by flushing the tubes
with laboratory-grade detergent and distilled water before storing.
16
