Floe PONTOON CRADLE PADS, Руководство по сборке

Страница: 13 / 16

SHEET 13 OF 16
FOLLOW THESE GUIDELINES FOR USING AND LOCATING THE PONTOON CRADLE PAD BUNKS (FIGURE
2.10).
-THE WIDTH OF THE CRADLE PAD BUNKS SHOULD KEEP THE PONTOONS OFF THE CRADLE BEAMS.
-THE BUNKS SHOULD BE KEPT AS LOW AS POSSIBLE (NOT QUITE TOUCHING THE CLAMP).
-TO PLACE CRADLE PAD BUNKS, FIND CENTER BETWEEN PONTOONS AND CENTER OF THE BOAT FROM
PONTOONS AND TRANSLATE MEASUREMENT TO CRADLE BEAM TO DETERMINE CENTER OF EACH PAIR
OF CRADLE PAD BUNKS. LOCATE MIDDLE CRADLE PAD BUNKS AROUND CENTER OF CRADLE BEAM.
-THE REAR OF A 21’ PONTOON BOAT SHOULD OVERHAND PAST THE LIFT BY 3 FEET. FOR EVERY
ADDITIONAL FOOT IN LENGTH OF THE BOAT, IT SHOULD OVERHANG BY AN ADDITIONAL 6 INCHES
BEYOND THE REAR OF THE LIFT. THESE ARE GENERAL GUIDELINES THAT CAN BE ADJUSTED FOR AN
INDIVIDUAL’S CIRCUMSTANCES.
-ONCE BUNKS ARE IN THEIR FINAL LOCATION, TORQUE 3/8” NUTS ON CRADLE CLAMPS TO 35 FT-LBS
AND 5/8” NUTS ON CRADLE CLAMPS TO 70 FT-LBS (FIGURE 2.10).
FIGURE 2.10