9
REAR PANEL CABLE CONNECTIONS
REAR PANEL CABLE CONNECTIONS
65W Power Supply (6 Pin)
(Included In Box)
USB-A To USB-B (Cable)
(10’ USB 2.0 - Cable Included In Box)
(Cable examples courtesy of Pro Audio LA)
DB-25/D-SUB Cable Snakes
(Female/Male XLR & TRS Options Available)
(Cables Not Included)
REAR VIEW
REQUIRED CABLES FOR OPERATION
ATTENTION:
INPUTS
OUTPUTS
NOTE
THAT THE DB-25 CONNECTORS ON THE REAR PANEL
ARE ALTERNATE ORIENTATIONS. DO NOT TRY TO FORCE THE
DB-25 CONNECTOR TO CONNECT IF IT IS NOT EASILY
CONNECTING. REVIEW ORIENTATION THEN TRY AGAIN.
NOTE
INPUTS & OUTPUTS ON THE REAR PANEL OF THE
PATCH LT SYSTEM ARE SEPARATELY DESIGNATED. YOU
CANNOT USE AN OUTPUT AS AN INPUT OR VICE VERSA.
PLEASE ENSURE TO AVOID RISK OR DAMAGE TO THE PATCH
SYSTEM OR OTHER EXTERNAL HARDWARE THAT IS
CONNECTED THAT YOU MAKE THE PROPER CONNECTIONS
ACCORDINGLY. TO LEARN MORE OF ABOUT PROPERLY
CONNECTING EXTERNAL HARDWARE TO THE PATCH LT
SYSTEM, SEE THE BOTTOM OF THIS PAGE.
INPUTS & OUTPUTS NOTICE
CONNECTING
PATCH TO EXTERNAL
HARDWARE EXAMPLE.
NOTE
ALL EXTERNAL HARDWARE MUST BE
CONNECTED IN THIS METHOD, SHOWN TO THE
LEFT SIDE OF THIS DESCRIPTION.
PATCH LT (OUT)
—->
EXTERNAL HARDWARE (IN)
EXTERNAL HARDWARE (OUT)
—->
PATCH LT (In)
OUTPUT
INPUT
INPUTS
(OUTPUT)
FROM
PATCH
TO
(INPUT)
OF
EXTERNAL GEAR
(OUTPUT)
FROM
EXTERNAL
GEAR
TO
(INPUT)
OF
PATCH
OUTPUTS
PATCH
lt
MANUAL
