Flo-Tite DM MPT100SS, Инструкция по установке, эксплуатации и обслуживанию

Страница: 5 / 8

IOM-DM MPT100-2018 Page 5
Valve Size
Repair Kits –
Repair kits typically consist of replaceable
seats, body seals, and packing seals. Refer to
the unit nameplate, as shown below, to confirm
what materials are currently installed. Contact
your local Flo-Tite Representative to order and
receive the kits prior to any maintenance work.
F lo-Tite’s marking system follows MSS SP-25-1998
Valve Markings - Casted into valve bodies include the following; Flo-Tite Name, Model Numbers, Body
Material, Valve Size, & WOG Pressure Rating
All Flo-Tite valves have metal name plates spot welded to the valve
body.
Standard Trim Soft
Parts
Flo-Tite Name
Valve Side A
VALVE - SOFT PARTS
SEAT STEM SEALS BODY SEAL O-RINGS
TFM F TFM F TFM F VITON V
CTFM Y CTFM Y CTFM Y EPDM E
PTFE T RTFM X PTFE T PTFE T
RPTFE R PTFE T RPTFE R BUNA B
50/50 S RPTFE R 50/50 S NONE N
UHMWPE U 50/50 S UHMWPE U
PEEK P UHMWPE U PEEK P
Cavity Filled C PEEK P Graphite G
Metal M Graphite G Kel-F K
Kel-F K