Flo-tech mc4000, Руководство пользователя

Страница: 16 / 28

MC4CON Software
MC4CON SOFTWARE
Installation
The MC4000 datalogger connects to a PC by means of a standard USB-A to USB-B cable . The installation requires about 8MB
of disk space under Windows .
After inserting the CD into the PC's DVD/CD drive, the MC4CON .exe setup utility opens automatically and installs the MC4CON
software on the PC . If the MC4CON .exe setup utility does not start, navigate to the DVD/CD drive and open one of the setup
files as shown in Figure 9 , and then double click on the setup .exe file to start the installation
MC4CON
German
MC4CON
Spanish
MC4CON
Italian
MC4CON
French
setup.exe
Figure 9: Setup folders and setup icon
Communication
MC4CON software allows bi-directional communication between a PC and the MC4000 datalogging utility . Communications
between the MC4000 and a PC is via the USB port that runs at 230,400 baud . The datalogger function is fully programmable
from a PC using the MC4000 in download mode . In upload mode, the PC transfers all recorded data, transients and
parameters to the MC4000 for manipulation .
The program automatically searches for an available communications port . When the MC4000 software finds an open
port and establishes communications with MC4000, the Connection indicator turns green, see Figure 10 on page 16 .
Disconnecting and then re-connecting the USB cable during communication severs the communication link between the PC
and the MC4000 . To re-establish communications, select Find COM . The communication will automatically be re-established .
COM Port Set Controls
USB
COM
Baud
230,400
O.K.
Find COM
Stop
Connection
COM 1
OFF
COM 2
COM 3
COM 4
COM 5
COM 6
COM 7
COM 8
COM 9
COM 10
COM Port Set COM Port Set
Figure 10: COM port controls
Button Function
Find COM Re-establish the communication when interrupted as experienced due to a disconnected cable .
OK Starts the search for an open COM port .
Stop Stop searching for an open COM port .
Connection
Turns green when communications are established between the MC4CON software and an
MC4000 MC4000 Handheld Hydraulic System Analyzer .
Page 16 February 2015 TST-UM-00017-EN-03