Flitework Extra 300LPX, Инструкция по эксплуатации, Страница: 4 / 12

- 4 -
To fit the fairings with adhesive tape against the
body is normally enough. Screw the wheel hub into the gear bow and take
care, that the edges of the hex head are parallel to
the edges of the bow.
Place the wheel with the adjusting rings on the
shaft, that it is in the middle of the wheel pants.
Screw the wheel pants with M3 screws to the gear
bow. Look for a parallel alignment of the pants!
Installing the rudder:
The lever parts of Extra 300 LPX consists of high
quality aluminium-, steel- and plastic parts. The
lever system is adjustable stepless. Very impor-
tant is, to make the 5 mm hole for the M5 bolt in
correct position and right angular, using a box
column drill. The lever system is able to be adapt-
ed stepless to any servo angel. The installation of
the lever system can be made before or after
glueing the hinges into the rudder. The lever
system can be mounted or dismounted any time.
During glueing the hinges, look for the correct
adjustment of the axis.
Axis direction !!
8mm
28mm